فارسی
English

شرکت آتصا

تامین تجهیزات ابزار دقیق و اتوماسیون صنعتی

تلفن : 34393714 (041)
Wika CPG 1000 Precision digital pressure gauge
 آتصا | ابزاردقیق و اتوماسیون صنعتی
The model CPG1000 precision digital pressure gauge takes the concept of an analogue gauge, and takes it to a level only matched by digital calibrators. The accuracy of digital measurement technology and the simplicity of an analogue gauge are brought together in the CPG1000, which in terms of performance, ease-of-use, and instrument features, is unmatched in the pressure measurement market.

The CPG1000 offers an accuracy of 0.05 % of span in 14 pressure ranges. It is temperature compensated between 0 ... 50 °C (32 ... 122 °F). Readings can be displayed in one of 21 standard units or also in customer-specific units, so that awkward conversions are avoided.

The measuring rate can be user-defined to match the type of measurement required. Standard applications usually use three measured values per second. If required, this rate can also be set to ten measured values per second. Via an energy-saving function, the CPG1000 switches automatically into “sleep” mode. With this, the battery life increases to up to 2,000 hours.

 

Features
With the MIN/MAX function, the highest and lowest pressures that have been automatically recorded by the CPG1000 can be immediately retrieved. An automatic power-off function can be activated after a predefined time interval in order to extend battery life. The ZERO and TARE functions compensate for any sensor drift. Password protection for on-site calibration can be activated via the CPG1000 keypad.

An RS-232 serial interface enables data for offline analysis to be read directly form the measuring instrument. An optional, external 24 V power supply input is available for the user, for when the CPG1000 is permanently built in to a process chain. The selectable damping function helps stabilise strongly-fluctuating pressures and makes them easier to read.
 

Special features:
  • Measuring ranges from 0 ... 70 mbar up to 0 ... 700 bar (vacuum and absolute pressure ranges also available)
  • Accuracy: 0.05 % (incl. calibration certificate)
  • Intrinsically safe version, II 3G Ex nA IIB T6
  • Rugged stainless steel case to NEMA 4/IP 65
  • Software and complete service cases (incl. pumps) available
     

برای اطلاعات بیشتر با بخش فروش تماس حاصل فرمایید.
 آتصا | ابزاردقیق و اتوماسیون صنعتی آتصا | ابزاردقیق و اتوماسیون صنعتی آتصا | ابزاردقیق و اتوماسیون صنعتی
درباره ما
شرکت آتصا (آلتین تجهیز صنعت آذربایجان) یکی از تامین کنندگان اصلی تجهیزات ابزار دقیق، کنترل فرآیند، اتوماسیون صنعتی، برق صنعتی، مکانیکی، پنوماتیکی و قطعات یدکی ماشین آلات سنگین مورد مصرف در صنایع نفت، گاز، پتروشیمی، عمرانی، صنایع غذایی، صنایع خودروسازی، صنایع فلزی و معدنی و... از معتبرترین تولیدکنندگان آمریکایی ،اروپایی و آسیایی‌‌ می‌باشد که از سال 1393 در ایران فعالیت‌‌ می‌نماید.
دانلود
برای دریافت فایلهای شرکت کلیک کنید
 آتصا | ابزاردقیق و اتوماسیون صنعتی  آتصا | ابزاردقیق و اتوماسیون صنعتی

 
تماس با ما
دفتر مرکزی: تبریز، خیابان 22 بهمن، تقاطع قطران، پلاک 1173، طبقه 3
تلفکس : 3714  3439  - 1327 3439  - 041
واتساپ و تلگرام : 41 80 916 0914
ایمیل : sales@atsa.co.ir
atsa.company@gmail.com
 
دفتر ترکیه: Istanbul - Maltepe
کلیه‌ی حقوق مادی و معنوی این وب سایت متعلق به شرکت آتصا‌‌ می‌باشد
طراحی و پشتیبانی : شرکت طراح نرم افزار پیشگام
سعید افتخاری فرwww.atsa.co.irwww.atsa.co.ir - صصص.شفسش.زخ.هق - صصص.صصص.شفسش.زخ.هق